Figure 4 Rear Panel (Hen041X3V); Table 5 Nvr Rear Panel Description (Hen041X3V) - Honeywell Performance Series User Manual

Figure 4 Rear Panel (HEN041x3V)

Table 5 NVR Rear Panel Description (HEN041x3V)

No.
1
2
3
4
5
6
7
8
9
10
6
Name
Power switch
Power input port
PoE port
Network port
VGA
MIC OUT
MIC IN
HDMI
USB port
Alarm input port (1-4)
NO C
CTRL
Performance Series Embedded NVR User Guide
Description
Power on/off button.
Power socket.
Built-in switch. Support PoE function.
For PoE series product, you can use this port to provide
power to the network camera.
10M/100Mbps self-adaptive Ethernet port. Connect to
the network cable.
VGA video output port. Output analog video signal. It can
connect to the monitor to view analog video.
Audio output port. It is to output the analog audio signal
to the devices such as the sound box.
•
Bidirectional talk output.
•
Audio output on 1-window video monitor.
Audio output on 1-window video playback.
Bidirectional talk input port. It is to receive the analog
audio signal output from the devices such as microphone,
pickup.
High definition audio and video signal output port. It
transmits uncompressed high definition video and
multiple-channel data to the HDMI port of the display
device. HDMI version is 1.4.
USB port. Connect to mouse, USB storage device and etc.
•
They receive signals from external alarm source.
Alarm input includes two types; NO (normal open)
and NC (normal close).
•
When your alarm input device is using external
power, make sure the device and the NVR have the
same GND.
GND. Alarm input ground port.
One NO activation output group. (On-off button).
Controllable power supply output. Control the output of
the on-off button alarm relay. It controls the alarm device