Figure 39 Enter Password 1 - Honeywell Performance Series User Manual

Note:
•
•
1. Log in to the local system of the Device.
2. On the LIVE interface, right-click and go to Main Menu > Camera >
3. Click Uninitialized, and then click Search Device.
4. Select a camera to be initialized and then click Initialize.

Figure 39 Enter Password 1

5. Set remote device password and email information.
Performance Series Embedded NVR User Guide
When you connect a camera to the NVR via PoE port, NVR
automatically initializes the camera. The camera adopts NVR
current password and email information by default.
When you connect a camera to the NVR via PoE port after NVR is
upgraded to the new version, the NVR might fail to initialize the
camera. Go to the Registration interface to initialize the camera.
Camera List > Add Camera.
Device displays camera(s) to be initialized.
The Enter Password interface is displayed.
Check/ uncheck Using current device password and email info.
If you uncheck the check box, configure parameters on the Enter
Password page. The default user is admin.
37