Table 73 Region Setting Parameters - Honeywell Performance Series User Manual

•
•

Table 73 Region Setting Parameters

Parameter
Name
Sensitivity
Threshold
Note: When anyone of the four regions activates motion detect alarm, the
channel where this region belongs to will activate motion detect alarm.
4. Right-click on the screen to exit the region setting interface.
5. On the Motion Detection interface, click Apply to complete the
Setting Schedule
Note: The system only activates the alarm in the defined period.
1. Next to Schedule, click Setting.
Figure 176 Setting
2. Define the motion detection period. By default, it is active all the
•
Define for a specified day of a week: On the timeline, click the half-
hour blocks to select the active period.
Define for several days of a week: Click
switches to
154
The selected area shows the color that represents the region.
Configure the parameters.
Description
Enter a name for the region.
Every region of every channel has an individual sensitivity value.
The bigger the value is, the easier the alarms can be activated.
Adjust the threshold for motion detect. Every region of every channel has an
individual threshold.
settings.
The Setting interface is displayed.
time.
Define the period by drawing.
. On the timeline of any selected day, click the half-
Performance Series Embedded NVR User Guide
before each day, the icon