Live View; Navigation Bar; Figure 135 Navigation Bar; Table 63 Live View Icons - Honeywell Performance Series User Manual

Live View

On the live view interface, you can view the monitor video of each
channel. The corresponding channel displays date, time, and channel
name after you overlay the corresponding information. Refer to the
following table for detailed information.

Table 63 Live View Icons

Icon

Navigation bar

You can quickly perform operation through the icon on the navigation
bar.
•
•
Click the live view interface. You can see navigation bar.

Figure 135 Navigation Bar

Table 64 Navigation Bar Icons

Icon
120
Description
When current channel is recording, system displays this icon.
When motion detection alarm occurs, system displays this icon.
When video loss alarm occurs, system displays this icon.
When current channel is in monitor lock status, system displays
this icon.
When the device connects to the network camera remotely,
system displays this icon.
This function is for some series products only.
Different series products may display different navigation bar icons.
Refer to the actual product for detailed information.
Go to Main Menu > System > General > Basic to enable navigation
bar function and then click OK; otherwise you cannot see the
following interface.
Function
Open Main Menu.
Expand or condense the navigation bar.
Select view layout.
Go to the previous screen.
Go to the next screen.
Enable tour function. The icon switches to
Close the tour or the triggered tour operation has canceled, and
device restores the previous preview video.
Performance Series Embedded NVR User Guide
.