Getting Started; Unpacking The Nvr; Connecting External Devices - Honeywell 35 Series User Manual

CHAPTER
2
This chapter contains the following sections:
•
Unpacking the
•
Connecting External
•
Starting and Shutting Down the NVR,
•
Device
•
Resetting
•
Two-way

Unpacking the NVR

Before you set up the NVR, make sure that you have received the following
items:
•
•
•
If any of the items listed above are missing or damaged, contact your
Honeywell dealer immediately.

Connecting External Devices

1. Connect the cameras
Connect the network cables from the cameras to the PoE port (The NVR
need to support PoE port) or router.
The router cannot be directly connected to the PoE port.
Note:
2. Connect the monitor
Performance Series Embedded NVR User Guide

GETTING STARTED

NVR, page
Devices, page
Initialization, page
Password, page
Talk, page 26
Quick Installation Guide
Quick Certificate Installation
Guide
Mouse
13
13
page 17
18
24
•
Power adapter and cable
•
Terminal block connectors (The
actual product shall prevail.)
•
Screws
13