Figure 83 Snapshot; Figure 84 Alarm Type; Figure 85 Motion Detection - Honeywell Performance Series User Manual

Figure 83 Snapshot

2. Select a channel to set schedule snapshot.
3. Set snapshot type as schedule.
4. Check the box to set alarm type.
Note: When the record type is Motion (motion detection), alarm, M&A, IVS
and POS, enable the channel record function when corresponding
alarm occurs. For example, when the alarm type is MD, go to Main
Menu > Event > Video Detection > Motion Detection, select the
record channel and enable record function.

Figure 85 Motion Detection

5. Refer to
6. Click Apply to save snapshot plan.
Performance Series Embedded NVR User Guide

Figure 84 Alarm Type

Recording Schedule to set snapshot period.
79