Encode; Figure 48 Privacy Masking; Table 22 Privacy Masking Parameters - Honeywell Performance Series User Manual

Figure 48 Privacy Masking

2. Configure parameters.

Table 22 Privacy Masking Parameters

Parameter
Channel
1, 2, 3, 4
Default
3. Click Apply.

Encode

Audio/Video
You can set video bit stream parameters such as bit stream type,
compression, resolution.
Note: Some series products support three streams: main stream, sub stream
1, sub stream 2. The sub stream maximally supports 1080p.
1. Go to Main Menu > Camera > Encode > Audio/Video.
46
Description
Select a channel.
Select Enable to enable privacy masking. The number represents the
number of masking areas. You can select a number and drag masking
areas to the screen, and you can also change the size of areas or drag
an area to other place.
You can drag up to 4 masking areas to one channel.
Set as device default configuration.
Performance Series Embedded NVR User Guide