Checking Poe Status; Figure 51 Camera Name Interface - Honeywell Performance Series User Manual

Figure 51 Camera Name Interface

2. Modify a channel name.
3. Click Apply.

Checking PoE Status

You can check PoE ports status and set enhancement mode for each
individual PoE port.
1. Go to Main Menu > Camera > Camera List > PoE.
2. (Optional) Set Enhancement Mode to On or Off.
Note:
PTZ Settings
You can set different PTZ parameters for local type and remote type.
Before you use local PTZ, make sure you have set PTZ protocol; otherwise
you cannot control the local PTZ.
50
You can only change the camera connected via the private
protocol.
The channel name supports 63 English characters.
When On is selected, the transmission distance of PoE port will be
extended.
The Status on PoE page doesn't represent the real connection
status for the 30/60 Series cameras.
•
Local: The PTZ device connects to the NVR through the cable.
Performance Series Embedded NVR User Guide