Figure 76 Record; Table 42 Channel Parameters - Honeywell Performance Series User Manual

Figure 76 Record

2. Select a channel from the drop-down list, you can set different

Table 42 Channel Parameters

Parameter
Channel
Pre-record
Redundancy
74
Storage > Schedule > Record.
record plans for different channels. Select All if you want to set for
all channels.
Description
In the Channel list, select a channel to record the video.
In the Pre-record list, enter the amount of time that you want to start the
recording in advance.
If there are several HDDs installed to the Device, you can set one of the
HDDs as the redundant HDD to save the recorded files into different
HDDs. In case one of the HDDs is damaged, you can find the backup in
the other HDD.
• Go to Main Menu > STORAGE > Disk Manager, and then set an
HDD as redundant HDD.
•
Go to Main Menu > STORAGE > Schedule > Record, and then select
the Redundancy check box.
o
o
This function is for some series products only.
The redundant HDD only back up the recorded videos but not snapshots.
Performance Series Embedded NVR User Guide
If the selected channel is not recording, the redundancy
function takes effect next time you record no matter you select
the check box or not.
If the selected channel is recording, the current recorded files
will be packed, and then start recording according to the new
schedule.