Figure 63 Advanced Interface; Table 31 General Interface Parameters; Table 32 Advanced Interface Parameters - Honeywell Performance Series User Manual

Table 31 General Interface Parameters

Parameter
SSID
Hide SSID
Encryption Type
Password
Select Channel
Network Proxy
Advanced Settings
Note: •
•
1. Go to Main Menu > Network > Wi-Fi AP > Advanced.

Figure 63 Advanced Interface

2. Configure parameters.

Table 32 Advanced Interface Parameters

Parameter
IP Address
Subnet Mask
Default Gateway
Start IP
Performance Series Embedded NVR User Guide
Description
Wi-Fi name for the device.
You can hide the Wi-Fi name when select this option.
Select an encryption mode. The device provides WPA2 PSK and WPA
PSK.
Set the Wi-Fi password for the device.
Select the channel for device communication.
Enables the external network access through the device for a wireless
IPC.
This function is supported on select wireless models.
You can configure IP address, subnet mask, default gateway,
DHCP server of the device.
The Advanced interface is displayed.
Description
Set IP address, subnet mask and default gateway for the Wi-Fi
parameters of NVR.
IP address and default gateway must be in the same network
segment.
Set the start IP address and end IP address of the DHCP server.
61