Honeywell Performance Series User Manual page 59

Parameter
Protocol Type
Encrypt
3. Click Next to complete the remote device registration.
Click
Click
You can also add cameras on the live view interface by clicking "+" on the
channel window.
Auto Changing H.265
For the remote device that first registered to the system, it can
automatically adopts encode format as H.265 if you enable H.265 Auto
switch function. The resolution will not be adjusted, and the stream value
will be halved.
Click H.265 Auto Switch at the bottom of the interface to enable the
function.
IP Export
Device can export the added device list to your local USB device.
1. Insert the USB device and then click the Export.
2. Select Address to save export file.
3. Click OK.
4. Device pops up a dialogue box to remind you successfully
When exporting IP address, the Backup Encryption check box is checked
by default. The file information includes IP address, port, channel
number, manufacturer, username, and password.
•
Performance Series Embedded NVR User Guide
Description
If the remote device is added through Onvif protocol, selecting the
Encrypt check box will provide encryption protection to the data being
transmitted.
To use this function, the HTTPS function should be enabled for the
remote IP camera.
c. Click OK.
The remote device information is displayed on the Added Device
list.
to change the remote device information such as IP address.
to delete remote device.
The Browse interface is displayed.
exported.
If you select the File Backup Encryption check box, the file format
is .backup.
•
If the remote device is added through private protocol, the
default type is TCP.
•
If the remote device is added through ONVIF protocol, the
system supports Auto, TCP, UDP, or MULTICAST.
•
If the remote device is added through other manufacturers, the
system supports TCP and UDP.
35