Figure 102 Date And Time; Table 47 Data And Time Parameters - Honeywell Performance Series User Manual

Parameter
Mouse Sensitivity
3. Click Apply button to save settings.
Date & Time
1. Go to Main Menu > SYSTEM > General > Date&Time.
2. Click Date&Time tab.

Figure 102 Date and Time

3. Configure the settings for date and time parameters.

Table 47 Data and Time Parameters

Parameter
System Time
Time Zone
Date Format
Date Separator
Performance Series Embedded NVR User Guide
Description
Adjust the speed of double-click by moving the
slider.
The bigger the value is, the faster the speed is.
Description
In the System Time box, enter time for the system.
Click the time zone list, you can select a time zone for the
system, and the time in adjust automatically.
Do not change the system time randomly; otherwise the
recorded video cannot be searched. It is recommended to
avoid the recording period or stop recording first before you
change the system time.
In the Time Zone list, select a time zone for the system.
In the Date Format list, select a date format for the system.
In the Date Separator list, select a date separator for the
system.
When the NVR is connected with 30/60 Series cameras,
select "/" as date separator because 30/60 Series cameras
only support "/" as date separator.
93