Web Operation; Network Connection - Honeywell 35 Series User Manual

CHAPTER
4
This chapter is intended for remote users of the NVRs. It describes how to
access Honeywell's 35 Series Network Video Recorder remotely using a
browser-based web client.
This chapter contains the following sections:
•
Network
•
Web
•
Web Main Menu,
Note: •
•

Network Connection

Ensure that the following conditions are met:
•
Ensure that the network connection is good.
•
Ensure that the NVR and PC network setup is correct. See the network
setup: Main Menu > Network > Network.
•
Ping to ensure that the network connection is good. Ping *** *** *** ***
(where *** *** *** *** is the NVR's IP address). The return TTL should be
less than 225.
Performance Series Embedded NVR User Guide

WEB OPERATION

Connection, page
Login, page 104
105
page
The interfaces in the Manual are used for introducing the operations
and only for reference. The actual interface might be different
dependent on the model you purchased. If there is inconsistency
between the Manual and the actual product, the actual product shall
govern.
Besides Web, you can use our HDCS to login the device. For detailed
information, refer to HDCS user guide.
103
103