File Menu Options; Avalanche Update Using File > Settings - Honeywell Thor VM2 User Manual
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Note: Some parameters and features described in this section may not be available if you are not
running the latest version of the Enabler. Contact
File Menu Options
Connect
Scan
Config
Settings
Avalanche Update using File > Settings
Use these menu options to setup the Avalanche Enabler on the Thor VM2. Change the
settings and save them by rebooting before connecting to the network.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
The Connect option under the File menu allows the user to initiate a manual connection to
the Mobile Device Server. The connection methods, by default, are wireless and COM
connections. Any updates available will be applied to the Thor VM2 immediately upon a
successful connection.
The Scan Configuration feature is not supported. The Scan Config option under the File
menu allows the user to configure Enabler settings using a special bar code that can be
created using the Avalanche MC Console utilities. Refer to the Wavelink Avalanche Mobility
Center User Guide for details.
The Settings option under the File menu allows the Thor VM2 user to access the control
panel to locally configure the Enabler settings. The Enabler control panel is, by default,
password protected.
The default Settings password is system. The password is not case-sensitive.
Technical Assistance
for upgrades.
283
Advertisement
Table of Contents
