Please refer to the
For information on the Ignition input signal see
Connection
AC/DC
The Thor VM2 is designed to power on whenever external power is attached. Due to the
presence of external power, longer default power management timeouts are used.
Ignition Control
The Thor VM2 is configured to power on when the vehicle ignition is switched on. When
the vehicle ignition is on, longer default power management timeouts are used. If the
vehicle ignition is turned off, shorter default power management timeouts are used.
Auto-On
The Thor VM2 is designed to power on whenever external power is attached. Due to the
presence of external power, longer default power management timeouts are used.
UPS
The Thor VM2 uses the UPS mode whenever external power is not available. Due to the
absence of external power, much shorter default power management timeouts are
used.
34
Power Configuration Mode
and
Auto-On Control Wiring
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
control panel for complete details.
Vehicle 10-60VDC Direct Power
Diagram.