Using Configuration Cloning Utility Gui; Menu Options - Honeywell Thor VM2 User Manual

Windows Embedded Standard 2009
1. Locate the CCU icon either on the desktop or by selecting
tion Cloning.
2. Double-tap the icon to launch the CCU.
Windows Embedded Standard 7 and Windows 7 Professional:
1. Locate the CCU icon either on the desktop or by selecting
tion Cloning.
2. Right click on the icon.
3. Select Run as administrator to launch the CCU.
It is necessary to run the CCU as an administrator because the CCU must be able to access and make changes
to the Windows registry.
Rather than selecting to run as administrator each time, right click on the CCU icon and select Properties. Tap
the Compatibility tab and check Run this program as an administrator. This modification affects the current
user only unless Change settings for all users is tapped before changing the privilege level.
4. If a User Account Control message is displayed, you must allow the CCU to make changes to the computer.

Using Configuration Cloning Utility GUI

Menu Options

File
The File menu contains information for working with the configuration files.
About
Displays version and copyright information for the Configuration Cloning Utility.
Open
Opens a configuration file. The CCU looks for configuration files in the C:\Windows\DDF folder. CCU can
open the following files types:
• ddf files - These files contain the factory default values for the software. These files are placed on the Thor
VM2 when the applicable software was installed or upgraded. Use this option if you wish to start a
configuration settings file based on the factory defaults.
• ccf files - These files contain the modified values for the software settings. These files are created with the
CCU . ccf files are encrypted for security. Once a ccf file is created on one Thor VM2 it can be copied to
other Thor VM2s to duplicate the configuration. An existing ccf file can be opened, modified, applied to the
Thor VM2, saved, saved with a different name, etc.
(Start) > All Programs > Honeywell >Configura-
(Start) > All Programs > Honeywell >Configura-
5 - 53