Tapping The Touch Screen With A Stylus - Honeywell Thor VM2 User Manual

Restart
A restart reboots the Thor VM2 without erasing any registry data. Configuration settings
are preserved during a restart. Network sessions are lost and any data in running appli-
cations that has not been previously saved may be lost. The contents of RAM are erased
and the operating system and CAB files are reloaded.
To initiate a restart:
•
•
Clearing Persistent Storage / Reset to Default Settings
Use the Registry control panel Load Factory Defaults button to set the Thor VM2 regis-
try back to factory defaults. No other clearing is available or necessary.

Tapping the Touch Screen with a Stylus

Note: Always use the point of the stylus for tapping or making strokes on the touch screen.
Never use an actual pen, pencil, or sharp/abrasive object to write on the touch
screen.
Hold the stylus as if it were a pen or pencil. Touch an element on the screen with the tip
of the stylus then remove the stylus from the screen.
Firmly press the stylus into the stylus holder when the stylus is not in use.
Using a stylus is similar to moving the mouse pointer then left-clicking icons on a desk-
top computer screen.
Using the stylus to tap icons on the touch screen is the basic action that can:
•
•
•
•
•
•
•
A right-click can be simulated by touching the touch screen with the stylus and holding
it for a short time.
A stylus replacement kit is available.
22
Using the Registry, select Start > Settings > Control Panel > Registry and tap the
Restart button. The Thor VM2 immediately restarts.
Using the Start menu, select Start > Run and type RESTART in the text box. Press
Enter. The Thor VM2 immediately restarts. The RESTART text command is not case-
sensitive.
Open applications
Choose menu commands
Select options in dialog boxes or drop-down boxes
Drag the slider in a scroll bar
Select text by dragging the stylus across the text
Place the cursor in a text box prior to typing in data
Place the cursor in a text box prior to retrieving data using a scanner/imager.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide