Wpa Psk - Honeywell Thor VM2 User Manual
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
The Thor VM2 should be authenticating the server certificate and using EAP-TLS for
the user authentication.
Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU
Main tab shows the device is associated after the radio connects to the network.
See
Note: The date must be properly set on the device to authenticate a certificate.
WPA PSK
To connect using WPA/PSK, make sure the following profile options are used:
4. Enter the SSID of the Access Point assigned to this profile
5. Set EAP Type to None
6. Set Encryption to WPA PSK or WPA2 PSK
7. Set Auth Type to Open
Click the WEP keys/PSKs button.
This value can be 64 hex characters or an 8 to 63 byte ASCII value. Enter the key and
click OK.
Once configured, click the Commit button.
Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU
Main tab shows the device is associated after the radio connects to the network.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Certificates
for information on generating a Root CA certificate or a User certificate.
329
Advertisement
Table of Contents
