Honeywell Thor VM2 User Manual page 179

Launch timeout
This timeout specifies the period of time for AppLock to wait for the application to ini-
tially launch after the application has been called. For example, if the application takes
time to launch and then initialize before a display window is created, use this delay to
specify the delay period.
Replace timeout
This timeout specifies the period of time for AppLock to wait after an initial screen (like a
password prompt screen) is replaced by another application window.
Restart timeout
This specifies the period of time for AppLock to wait for an application to restart. If the
application fails to restart automatically, AppLock then proceeds according to the
options selected when the application was configured on the
Application Launch Options
Status
Use the Status panel to view the log of previous AppLock operations and to configure
which messages are to be recorded during AppLock operation.
Status information is stored in a specific location on the storage device and in a specific
log file specified by the Administrator. For this reason, the administrator can configure
the type of status information that is logged, as well as clear the status information.
Move the cursor to the Filename text box and either type the logfile path or tap the
Browse button (the ... button). The standard Windows CE Browse dialog is displayed.
After selecting the logfile from the Browse dialog, tap OK.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
panels.
Application and
167