Honeywell Thor VM2 User Manual page 180

For detail on error messages written to the log, see
Note: If your Status Panel does not look like the figure shown above, you may have the Single
Application version which does not have as many options.
View
Level
Error
Process
Extended
All
Tap the Refresh button after changing from one view level to another. The filtered
records are displayed, all others are not displayed.
Log
Note: If a level higher than Error is selected, the status log should be cleared frequently by the
administrator.
In addition to the three view levels the administrator can select that all status informa-
tion be logged or turn off all status information logging completely. The system default
is 'None'; however to reduce registry use, the administrator may want to select 'None'
after verifying the configuration. Tap the ton to clear the status information from the
registry.
•
•
•
•
•
Save As
When the Save As... button is selected, a standard 'Save As' dialog screen is displayed.
Specify the path and filename. If the filename exists, the user is prompted whether the
file should be overwritten. If the file does not exist, it is created.
See Also:
AppLock Help
The mobile device won't switch from Administration mode to end-user mode.
If the configuration is valid for one application but not the other, the switch to end-user
mode fails. AppLock stays in Administration mode and is stopped until the Administra-
tor password is entered.
The hotkey sequence needed is not allowed. What does this mean?
168
Messages Displayed
Error status messages are logged when an error occurs and is intended to be used by the
administrator to determine why the specified application cannot be locked.
Processing status shows the flow control of AppLock components and is mainly intended for
Customer Service when helping users troubleshoot problems with their AppLock program.
Extended status provides more detailed information than that logged by Process Logging.
All messages are displayed.
None
Error
Processing
Extended
All
AppLock Error
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Messages.
AppLock Error Messages.