Procedure; Bios - Honeywell Thor VM2 User Manual

•

Procedure

1. Verify a dependable power source is applied to the Thor VM2 and will stay connected
2. Warmboot the Thor VM2 before beginning the update process.
3. Establish an ActiveSync connection between the Thor VM2 and a desktop/laptop
4. Download the OS files from the desktop/laptop to the Thor VM2's System folder.
5. During the file copy process to the Thor VM2 System folder, when asked
6. Review the files that were downloaded to the System folder.
7. Restart the Thor VM2.
8. Disconnect from ActiveSync.
9. When the OS finishes loading, check the OS update version by selecting Start >
The touch screen may require calibration, however some Windows OS versions save the
calibration data, eliminating the need to calibrate.
If the Thor VM2 won't boot up after the upgrade is finished, contact
Assistance

BIOS

The Microsoft Windows CE operating system is installed before shipping. The default
BIOS parameters are configured at that time. In most cases, it is unnecessary to modify
the BIOS parameters.
Generally, it is only necessary to enter the BIOS setup to change the boot order of the
drives.
This section is not intended to detail all features of the BIOS, instead it is intended to
cover the most commonly used setup options.
Caution: Be very careful when using this utility to modify BIOS Setup
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Always perform OS updates when the Thor VM2 has a dependable external power
source connected to the Thor VM2.
during the upgrade procedure.
computer.
"Overwrite?", select Yes to All.
Settings > Control Panel > About > Software tab.
for re-imaging options.
parameters. The Thor VM2 may generate unexpected results
when incorrect or conflicting parameter values are entered.
Selecting incorrect or invalid options may require the Thor VM2
to be returned for repairs.
The parameters should only be modified by Information
Services personnel or the system administrator.
Technical
149