Honeywell Thor VM2 User Manual page 210
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Once the user types any character into the Replacement edit control, reselecting the
character from the Character drop down box redisplays the default Ignore (drop) in the
Replacement edit control.
Replacement
The edit control where the user types the characters to be assigned as the replacement
of the control character.
Replacements for a control character are assigned by selecting the appropriate charac-
ter from the Character drop down box, typing the replacement in the Replacement edit
control (according to the formats defined above) and then clicking the button. The
assigned replacement is then added to the list box above the Assign button.
For example, if Carriage Return is replaced by Line Feed (by specifying ^J or 0x0A) in the
configuration, the value 0x0d received in any scanned bar code (or defined in the prefix
or suffix) will be replaced with the value 0x0a.
The Wedge then sends Ctrl+J to the receiving application, rather than Ctrl+M.
List Box
The list box shows all user-defined control characters and their assigned replacements.
All replacements are enclosed in single quotes to delimit white space that has been
assigned.
Assign Button
Click this button when you want to assign the characters in the Replacement text box to
the character in the Character drop down box.
Delete Button
This button is grayed unless an entry in the list box is highlighted.
When an entry (or entries) is highlighted, and the Delete button is clicked, the high-
lighted material is deleted from the list box.
Custom Identifiers
Code IDs are defined by the user for external bar code scanners. These are called cus-
tom Code IDs and are included in the Symbology drop down box in the Symbology dia-
log, unless Enable Code ID is set to None. When the custom Code ID is found in a bar
code, the configuration specified for the custom Code ID is applied to the bar code data.
When Enable Code ID is set to None, custom code IDs are ignored.
Note: When Strip: Code ID is enabled, the entire custom Code ID string is stripped (i.e., treated
as a Code ID).
The dialog box shown below allows the custom Code IDs to be configured. When incom-
ing data is checked for a custom ID code, the list is compared in the order displayed in
this dialog box.
198
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Advertisement
Table of Contents
