Honeywell Thor VM2 User Manual page 73

Vehicle-mounted computer with microsoft windows embedded ce 6.0

Hide thumbs Also See for Thor VM2:

Table of Contents

1. Determine the position for mounting the RAM ball base. Be sure to position the RAM

2. Attach the RAM ball base to the vehicle mounting surface using three or four 1/4

Mounting Dimensions

Note: Drill and tap holes for three 1/4 bolts. Drawing not to scale.

3.69" / 93.73 mm

Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide

bracket to allow access to the switches and ports on the bottom of the Thor VM2.

bolts (not included) or equivalent fasteners. If the mounting kit includes cone

washers, use those as illustrated below.

IMPORTANT: Mount to the most rigid surface available.

2.75" / 69.85 mm