Honeywell Thor VM2 User Manual page 192
Vehicle-mounted computer with microsoft windows embedded ce 6.0
Hide thumbs
Also See for Thor VM2:
- User manual (366 pages) ,
- Reference manual (196 pages) ,
- Quick start manual (12 pages)
Table of Contents
Advertisement
Bluetooth Indicators
There may be audible or visual signals as paired devices re-connect with the Thor VM2.
Only printers or scanners are recognized and displayed in the Bluetooth panel. All other
Bluetooth devices are ignored.
Taskbar
Icon
Note: When an active paired device enters Suspend Mode, is turned Off or leaves the Thor VM2
Bluetooth scan range, the Bluetooth connection between the paired device and the Thor
VM2 is lost. There may be audible or visual signals as paired devices disconnect from the
Thor VM2.
Bluetooth LED
Blue, blinking slowly
Blue, blinking medium
Blue, blinking fast
Off
AppLock, if installed, does not stop the end-user from using Bluetooth applications, nor
does it stop authorized Bluetooth-enabled devices from pairing with the Thor VM2
while AppLock is in control.
Bluetooth Bar Code Reader Setup
Please refer to the Bluetooth scanner manufacturer's User Guide; it may be available on
the manufacturer's web site. Contact
tance.
Several different types of bar code readers are supported. This section describes the
interaction and setup for a mobile Bluetooth laser scanner or laser imager connected to
the Thor VM2 using Bluetooth functions.
Prerequisites
•
•
•
•
180
Legend
Thor VM2 is connected to one or more of the targeted Bluetooth device(s).
•
Thor VM2 is not connected to any Bluetooth device.
•
Thor VM2 is ready to connect with any Bluetooth device.
•
Thor VM2 is out of range of all paired Bluetooth device(s). Connection is
inactive.
Legend
Bluetooth is active but not connected to a device.
Bluetooth is paired and connected to a device.
Bluetooth is discovering other Bluetooth devices.
Bluetooth hardware has been turned off or does not exist in the Thor VM2.
If the Thor VM2 has a Bluetooth address identifier bar code label affixed, then
Bluetooth hardware and software is installed.
The mobile Bluetooth laser scanner / laser imager battery is fully charged.
The Thor VM2 is connected to AC or DC (vehicle) power.
Important: The bar code numbering examples in this segment are not real and
should not be created nor scanned with a Bluetooth scanner.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Technical Assistance
for Bluetooth product assis-
Advertisement
Table of Contents
