Honeywell Thor VM2 User Manual page 255

Factory Default Programmable Key Values
Programmable
Key
P1
P2
P3
P4
P5
Note: Programmable Key Control Panel options LaunchApp and RunCmd do not inter-relate
with similarly-named options contained in other Control Panel applets. For example, the
AppLock Administrator Control panel file Launch option.
KeyMap
Assign settings by clicking radio buttons and selecting keys from the drop down boxes.
Tap the OK button when finished. The changes take effect immediately.
Remap a Key to a Single Key
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select the value for the remapped key from the Remapped Key pull-down list.
4. Click OK to save the result and close the control panel.
Remap a Key to a Unicode Value
1. Select the modifier key from the Modifier Mode options.
2. Select the key to be remapped from the Key pull-down list.
3. Select Unicode from the Remapped Key pull-down list.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Default Programmable
Value Key
F1 P6 (Orange + P1)
F2 P7 (Orange + P2)
F3 P8 (Orange + P3)
F4 P9 (Orange + P4)
F5 P10 (Orange + P5)
Default
Value
<no key>
<no key>
<no key>
<no key>
<no key>
243