Honeywell Thor VM2 User Manual page 258

LaunchApp
The default for all text boxes is Null or " ". The text boxes accept string values only.
Note that executables and parameters are not checked for accuracy by the keyboard
driver. If the launch fails, the Thor VM2 emits a single beep, if the launch is successful, it
is silent.
The Launch App command is defined for use by system administrators. These instruc-
tions are parsed and executed directly by the keyboard driver.
1. Place the cursor in the text box next to the App you wish to run, e.g., App1, App2.
2. Enable the EXE radio button if the application is an EXE file.
3. Enter the name of the executable file.
4. Enable the OPT radio button to add options or parameters for the executable file in
5. Tap the OK button when finished. The changes take effect immediately.
The result of the application (exe) and options (opt) entries are displayed on the Key-
Map tab in the Key Sequence box when the key mapped to the LauchApp is selected.
RunCmd
The default for all text boxes is Empty, Null or " ". The text boxes accept string values
only.
Note that executables and parameters are not checked for accuracy by the keyboard
driver. If the launch fails, the Thor VM2 emits a single beep, if the launch is successful,
the mobile device is silent.
246
the same text box. Switching from EXE to OPT clears the text box (but the
information previously entered is stored), allowing parameter entry.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide