Administration - Honeywell Thor VM2 User Manual

Administration

Start > Settings > Control Panel > Administration
AppLock is designed to be run on certain certified Windows CE based devices only. The
AppLock program is installed as part of the default software load and is configured with
the Administration control panel.
Configuration parameters are specified by the AppLock Administrator for the Thor VM2
end-user. AppLock is password protected by the Administrator.
End-user mode locks the end-user into the configured application or applications. The
end user can still reboot the mobile device and respond to dialog boxes. The adminis-
trator-specified applications are automatically launched in the specified order and run
in full screen mode when the device boots up.
When the mobile device is reset to factory default values, for example after a cold reset,
the Administrator may need to reconfigure the AppLock parameters.
The assumption, in this section, is that the first user to power up a new mobile device is
the system administrator.
Note: AppLock Administrator Control panel file Launch option does not inter-relate with
similarly-named options contained in other Thor VM2 Control Panels.
Note: A few applications do not follow normal procedures when closing. AppLock cannot
prevent this type of application from closing, but is notified that the application has
closed. For these applications, AppLock immediately restarts the application (see Auto
Re-Launch) which causes the screen to flicker. If this type of application is being locked,
the administrator should close all other applications before switching to end-user mode
to minimize the screen flicker.
AppLock is updated periodically as new options become available. Contact
Assistance
Factory Default Settings - AppLock
Application
Filename
Title
Arguments
Order
Internet
Global Key
Global Delay
Input Panel
Application Launch Options
Auto at Boot
Auto at Boot Retries
Auto at Boot Delay
Auto Re-launch
156
for update availability.
Blank
Blank
Blank
1
Disabled
Ctrl+Spc
10 sec
Disabled
Enabled
0
10 sec
Enabled
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Technical