4. Tap Activate.
5. All other text boxes are grayed out as no additional entries are required for
6. Verify the activation process is successful by reviewing the message below the
Manual Activation
1. Select the Manual radio button for Activation Type.
2. Enter the Service Programming Code, System Identification number, Mobile
3. Tap Save Connection Data.
4. Tap Activate.
5. Verify the activation process is successful by reviewing the message below the
Autoconnect
When checked, Autoconnect is enabled. The Connection Manager automatically con-
nect when necessary, such as when Internet Explorer is launched.
Data Connection Test
Tap the Connect button to make a temporary test connection to validate the carrier
account.
Entries identified with an asterisk (*) are used to configure the test connection.
Tap the Save Connection Data button to save the connection parameters.
UTMS
Use the UTMS tab to configure the session parameters.
212
automatic activation.
Activate button.
Directory number and Mobile Identification Number in the appropriate text boxes.
The Activation Code text box is not used.
Activate button.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide