File Menu Options; Avalanche Update Using File > Settings; Menu Options - Honeywell Thor VM1 User Manual

File Menu Options

The Connect option under the File menu allows the user to initiate a manual connection to the Mobile Device
Connect
Server. The connection methods, by default, are wireless and COM connections. Any updates available
will be applied to the Thor VM1 immediately upon a successful connection.
The Scan Configuration feature is not supported. The Scan Config option under the File menu allows the
Scan
user to configure Enabler settings using a special bar code that can be created using the Avalanche MC
Config
Console utilities. Refer to the Wavelink Avalanche Mobility Center User Guide for details.
The Settings option under the File menu allows the Thor VM1 user to access the control panel to locally
Settings
configure the Enabler settings. The Enabler control panel is, by default, password protected.
The default Settings password is system. The password is not case-sensitive.
Avalanche Update using File > Settings
Use these menu options to setup the Avalanche Enabler on the Thor VM1. Change the settings and save them by reboot-
ing before connecting to the network.
Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wavelink Avalanche Mobility Center
User's Guide for details).

Menu Options

Note: Your Thor VM1 screen display may not be exactly as shown in the following menu options. Contact
Assistance (page 11-1) for version information and upgrade availability.
Connection (page 7-6)
Server Contact (page 7-6) Setup synchronization, scheduled Mobile Device Server contact, suspend and reboot set-
Data (page 7-7)
Preferences (page 7-8)
Display (page 7-9)
Taskbar (page 7-9)
Execution (page 7-10)
Scan Config (page 7-10)
Shortcuts (page 7-11)
SaaS (page 7-11)
Adapters (page 7-12)
Status (page 7-13)
Enter the IP Address or host name of the Mobile Device Server. Set the order in which
serial ports or RF connections are used to check for the presence of the Mobile Device
Server.
tings.
Control when data is transferred between the device and the Mobile Device Server.
Set options for Enabler startup or shutdown and logging.
Set up the Windows display at startup, on connect and during normal mode. The settings
can be adjusted by the user.
Set options for Taskbar.
Not available in this release. Use AppLock instead, which is resident on each device.
This option allows the user to configure Enabler settings using a special bar code that is
created by the Avalanche MC Console. Scan Config not currently supported.
Add, delete and update shortcuts to user-allowable applications.
Configure the Enabler to connect with Avalanche on Demand.
Enable or disable network and wireless settings. Select an adapter and switch between
the Avalanche Network Profile and manual settings.
View the current adapter signal strength and quality, IP address, MAC address, SSID,
BSSID and Link speed. The user cannot edit this information.
Technical
7 - 5