Honeywell Thor VM2 User Manual page 211

After adding, changing and removing items from the Custom IDs list, click the OK but-
ton to save changes and return to the Bar Code panel.
Parameters
Name text box
Name is the descriptor that is used to identify the custom Code ID. Names must be
unique from each other; however, the Name and ID Code may have the same value.
Name is used in the Symbology drop down box to identify the custom Code ID in a user-
friendly manner. Both Name and ID Code must be specified in order to add a custom
Code ID to the Custom IDs list.
ID Code text box
ID Code defines the data at the beginning of a bar code that acts as an identifier (the
actual Code ID). Both Name and ID Code must be specified in order to add a custom
Code ID to the Custom IDs list.
Buttons
Add
Entering data into both the Name and ID Code fields enables the Add button. Click the
Add button and the data is added to the next empty location in the Custom ID list.
Insert
Click on an empty line in the Custom ID list. The Add button changes to Insert. Enter
data into both the Name and ID Code fields and click the Insert button. The data is
added to the selected line in the Custom IDs list.
Edit
Double-click on the item to edit. Its values are copied to the text boxes for editing. The
Add button changes to Replace. When Replace is clicked, the values for the current item
in the list are updated.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 199