Disconnect; Thor Vm2 With A Disabled Touch Screen; Reset And Loss Of Host Re-Connection; Activesync Help - Honeywell Thor VM2 User Manual

Disconnect

•
•
When the Thor VM2 loses connection, e.g.: enters Suspend Mode, etc., the connection to
ActiveSync will be lost. When the Thor VM2 resumes, the ActiveSync session will auto-
matically re-connect.

Thor VM2 with a Disabled Touch screen

A Thor VM2 touch screen can be disabled via the Misc tab of the
In these cases, it may be easier to configure the Thor VM2 using ActiveSync and HSM
Connect or LXEConnect rather than using the Thor VM2 keypad only.

Reset and Loss of Host Re-connection

ActiveSync assigns a partnership between a Thor VM2 (the client) and a host computer.
A partnership is defined by two objects – a unique computer name and a random num-
ber generated when the partnership is first created. An ActiveSync partnership between
a unique client can be established to two hosts.
When the mobile device is reset (return to default settings), the random number is
deleted – and the partnership with the last one of the two hosts is also deleted. The host
retains the random numbers and unique names of all devices having a partnership with
it. Two clients cannot have a partnership with the same host if they have the same
name. (Control Panel > System > Device Name)
If the reset mobile device tries to reestablish the partnership with the same host PC, a
new random number is generated for the mobile device and ActiveSync will insist the
unique name of the mobile device be changed. If the mobile device is associated with a
second host, changing the name will destroy that partnership as well. This can cause
some confusion when re-establishing partnerships with hosts.

ActiveSync Help

ActiveSync on the host says that a device is trying to connect, but it cannot identify it
Verify the cable is attached to the Thor VM2. Disconnect and reconnect the cable from
the PC.
Check that the correct connection is selected.
See Reset and Loss of Host Re-connection, above.
ActiveSync indicator on the host (disc in the toolbar tray) turns green and spins as soon
as you connect the cable, before tapping the Connect icon (or REPLLOG.EXE in the
Windows directory).
272
Disconnect the cable from the Thor VM2.
Open the status bar icon in the lower right hand corner of the status bar. Then tap the
Disconnect button.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Options control panel.