Honeywell Thor VM2 User Manual page 306

Properties Icon
Note: A reboot may be required after enabling or disabling these options.
Network
Authentication
It is not recommend to enable "Manage Wireless Settings" for Summit Client devices.
Troubleshooting - When you download a profile that is configured to manage network
and wireless settings, the Enabler will not apply the manage network and wireless set-
tings to the adapter unless the global Manage wireless settings and Manage network
settings options are enabled on the
network and wireless settings are controlled by the third-party software associated with
these settings.
Status
The Status panel displays the current status of the Thor VM2 network adapter selected
in the drop down box. Note the availability of the Windows standard Refresh button.
When the Windows Refresh button is tapped, the signal strength, signal quality and link
speed are refreshed for the currently selected adapter. It also searches for new adapters
and may cause a slight delay to refresh the contents of the drop-down menu.
294
Selecting the Properties icon displays the Manual Settings Properties dialog applet.
From here, the user can configure Network, DNS and Wireless parameters using the
displays shown below:
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
DNS
Wireless
Adapters panel. Until these options are enabled, the