Honeywell Thor VM2 User Manual page 170

The administrator must enter a valid password (when a password has already been
assigned) before access to Administration mode and configuration options are allowed.
The administrator can configure the following options:
•
•
•
•
In addition to these configuration options, the administrator can view and manage the
status logs of AppLock sessions.
Administrator default values for this device:
Administrator Hotkey
Shift+Ctrl+A
Note: You must use an external keyboard with the Thor VM2 to enter the Administrator Hotkey.
Password
none
Application path and name
none
Application command line
none
End User Mode
End-user mode locks the end-user into the configured application or applications. The
end user can still reboot and respond to dialog boxes. Each application is automatically
launched and runs in full screen mode when the device boots up.
The user cannot unintentionally or intentionally exit the application nor can the end
user execute any other applications. Normal application exit or switching methods and
all Microsoft defined Windows CE key combinations, such as close (X) icon, File Exit,
File Close, Alt-F4, Alt-Tab, etc. are disabled. The Windows CE desktop icons, menu bars,
task bar and system trays are not visible or accessible. Task Manager is not available.
158
Create/change the keystroke sequence to activate administrator access.
Create/change the password for administrator access.
Assign the name of the application, or applications, to lock.
Select the command line of the application to lock.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide