Honeywell Thor VM2 User Manual page 338

The SCU supports EAP-FAST with automatic or manual PAC provisioning. With auto-
matic PAC provisioning, the user credentials, whether entered on the saved credentials
screen or the sign on screen, are sent to the RADIUS server. The RADIUS server must
have auto provisioning enabled to send the PAC provisioning credentials to the Thor
VM2.
For automatic PAC provisioning, once a username/password is authenticated, the PAC
information is stored on the Thor VM2. The same username/password must be used to
authenticate each time. See the note below for more details.
For manual PAC provisioning, the PAC filename and Password must be entered.
See
The entries on the Credentials screen are determined by the type of credentials (stored
or sign on) and the type of PAC provisioning (automatic or manual).
Click on the Credentials button.
To use Stored Credentials, click on the Credentials button. No entries are necessary for
Sign-On Credentials with automatic PAC provisioning as the user will be prompted for
the Username and Password when connecting to the network.
To use Sign-On credentials:
•
To use Stored Credentials:
•
•
To use Automatic PAC Provisioning:
•
326
Sign-On vs. Stored Credentials
Do not enter a User and Password as the user will be prompted for the Username and
Password when connecting to the network.
Enter the Domain\Username (if the Domain is required), otherwise enter the
Username.
Enter the password.
No additional entries are required.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
for information on entering credentials.