Honeywell Thor VM2 User Manual page 382

Message
Open failure
Open registry failure
Opened status file
Out of memory for
encrypted pwd
pRealTaskbarWndProc
already set
Pwd cancelled or
invalid-remain in user
mode
Read registry error-hot
key
Read registry failure-app
name
Read registry failure-
Cmd Line
Read registry failure-
Internet
Registering Backdoor
MSG
Registering Hotkey MSG
Registry read failure at
reenter user mode
Registry read failure at
reenter user mode
Registry read failure
Reset system work area
failure
370
Explanation and/or corrective action
The status information is being saved to a file and the file
open has failed. This could occur if the file is write protected. If
the file does not exist, it is created.
If the Administration registry key does not exist, the switch to
user mode fails because the AppName value in the
Administration key is not available.
The status information is being saved to a file and the file has
been opened successfully.
Not enough memory to encrypt the password.
The taskbar control has already been installed.
The password prompt was cancelled by the user or the
maximum number of failed attempts to enter a password was
exceeded.
The hotkey registry entry is missing or empty. This is not
considered an error. The keyboard hook uses an embedded
default if the value is not set in the registry.
AppName registry value does not exist or is empty. This
constitutes a failure for switching into user mode.
AppCommandLine registry entry is missing or empty. This is
not considered an error since command line information is
not necessary to launch and lock the application.
The Internet registry entry is missing or empty. This is not
considered an error since the Internet value is not necessary
to launch and lock the application.
The AppLock system communicates with the keyboard hook
via a user defined message. Both AppLock.exe and
Kbdhook.dll register the message at initialization.
The AppLock system communicates with the keyboard hook
via a user defined message. Both Applock.exe and
Kbdhook.dll register the message at initialization.
The registry has to be read when entering user mode is the
AppName is missing. This user mode entry is attempted at
boot and after a hotkey switch when the administrator has
closed the application being locked or has changed the
application name or command line.
The registry has to be read when switching into user mode.
This is because the administrator can change the settings
during administration mode. The read of the registry failed
which means the Administration key was not found or the
AppName value was missing or empty.
The registry read failed. The registry information read when
this message is logged is the application information. It the
Administration key cannot be opened or if the AppName value
is missing or empty, this error is logged. The other application
information is not required. If the AppName value is not
available, AppLock cannot switch into user mode.
The system work area is adjusted when in user mode to cover
the taskbar area. The system work area has to be adjusted to
exclude the taskbar area in administration mode. AppLock
was unable to adjust this area.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Level
LOG_ERROR
LOG_ERROR
LOG_EX
LOG_ERROR
LOG_EX
LOG_EX
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_
PROCESSING
LOG_
PROCESSING
LOG_ERROR
LOG_ERROR
LOG_ERROR
LOG_ERROR