Using Hsm Connect - Honeywell Thor VM2 User Manual

4. An explorer window is displayed for the Thor VM2. Browse to the
5. Select and copy the Setup.exe and HSM Connect.msi files from the Thor VM2 to the
6. Close the explorer dialog box. Do not disconnect the Thor VM2 ActiveSync
7. Execute the setup.exe file that was copied to the user PC. This setup program
8. Follow the on screen installation prompts. The default installation directory
9. If desired, when the installation is complete, create a desktop shortcut to the HSM
10. HSM Connect is now installed and ready to use.

Using HSM Connect

1. Power up the Thor VM2.
2. Connect the Thor VM2 to the host PC using the USB connection cable. Once
3. Select "No" for partnership when prompted. Dismiss any ActiveSync dialog boxes
274
\System\HSMConnect folder. Contact
one of this folder is not present.
user PC. Note the location chosen for the files.
connection.
installs the HSM Connect utility.
depends on the PC operating system:
• C:\Program Files\Honeywell Inc\HSM Connect [version] (for 32-bit machines
with HSM Connect installed)
• C:\Program Files (x86) \Honeywell Inc\HSM Connect [version] (for 64-bit
machines with HSM Connect installed)
Connect.exe file at the location indicated above. If a different directory was selected
during installation, please substitute the appropriate directory.
connected, the ActiveSync dialog box appears and the ActiveSync connection is
automatically established.
warning a partnership is not set up. It is not necessary to establish a partnership to
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Customer Support for the necessary files if