Using Remote Management - Honeywell Thor VM2 User Manual

Link speed indicates the speed at which the signal is being sent from the adapter to the
Thor VM2. Speed is dependent on signal strength.
Exit
The Exit option is password protected. The default password is leave. The password is
not case-sensitive.
Depending on the behavior chosen for the Shutdown parameter, the following screen
may be displayed:
Note: The icon on the screen above may differ based on the version of the Enabler installed on
the Thor VM2.
Change the option if desired. Tap the X button to cancel Exit. Tap the OK button to exit
the Avalanche applet.

Using Remote Management

1. Configure the radio to connect to the network running the Mobile Device Server.
2. If it is desired to configure the radio using the Summit package, add the configured
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
After the Thor VM2 is connected, proceed to step 2.
package to the Wavelink Avalanche MC Console and enable it.
295