Honeywell Thor VM2 User Manual page 130

3. Slide the cable ends together until they click shut. Do not twist or bend the
Adjust Headset / Microphone and Secure Cable
The headset consists of an earpiece, a microphone, a clothing clip and a cable.
1. Do not twist the microphone boom when adjusting the microphone. The micro-
2. Make sure the microphone is pointed at your mouth. Note the small "Talk" label near
3. Follow the safety guidelines below when wearing the headset.
Under Clothing
•
•
Over Clothing
•
•
•
118
click!
connectors. The Thor VM2 internal microphone and speakers are automatically
disabled when the headset is connected.
phone should be adjusted to be about two finger widths from your mouth.
the mouthpiece. Make sure the Talk label is in front of your mouth. The microphone
cable can be routed over or under clothing.
Leave the cable exposed only at the top of the collar.
Be sure to leave a small loop of cable to allow movement of your head.
Use clothing clips to hold the cable close to your body.
Tuck the cable under the belt, but leave a small loop where it goes under the belt.
Do not wear the cable on the front of your body. It may get in your way or get caught
on protruding objects.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide