Certificates; Quick Start; Generate A Root Ca Certificate - Honeywell Thor VM2 User Manual

Certificates

Note: Please refer to the Security Primer to prepare the Authentication Server and Access Point
for communication.
Note: It is important that all dates are correct on the Thor VM2 and host computers when using
any type of certificate. Certificates are date sensitive and if the date is not correct
authentication will fail.

Quick Start

Root Certificates are necessary for EAP-TLS, PEAP/GTC and PEAP/MSCHAP.
1.
2. Connect the Thor VM2 to the desktop PC using ActiveSync and copy the certificate
3.
User Certificates are necessary for EAP-TLS.
1.
2. Connect the Thor VM2 to the desktop PC using ActiveSync and copy the certificate
3.
4. After installation, perform a Suspend/Resume.
5.

Generate a Root CA Certificate

Note: It is important that all dates are correct on the Thor VM2 and host computers when using
any type of certificate. Certificates are date sensitive and if the date is not correct
authentication will fail.
The easiest way to get the root CA certificate is to use a browser on a PC to navigate to
the Certificate Authority. To request the root CA certificate, open a browser to
http://<CA IP address>/certsrv.
Sign into the CA with any valid username and password.
330
Generate a Root CA Certificate
to the Thor VM2 \System folder.
Install a Root CA Certificate.
Generate a User Certificate
and private key file to the Thor VM2 \System folder.
Install a User Certificate
Verify Installation.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
and download it to a PC.
and private key file and download them to a PC.
and the private key file.