Stylus - Honeywell Thor VM2 User Manual

Stylus

Start > Settings > Control Panel > Stylus
Use this control panel option to set stylus double-tap sensitivity properties and cali-
brate the Thor VM2 touch panel when needed.
Double-Tap
Follow the instructions on the screen and tap the OK button to save any double-tap
changes.
Calibration
Calibration involves tapping the center of a target. If you miss the center, keep the stylus
on the screen, slide it over the target's center, and then lift the stylus.
To begin, tap the Recalibrate button on the screen with the stylus. Press and hold the
stylus on the center of the target as it moves around the screen. Press the Enter key to
keep the new calibration setting or press the Esc key to revert to the previous calibration
settings.
Note: If the touch screen looses calibration on a Thor VM2, you must use a USB mouse or
keyboard attached to the Thor VM2 to access this tab to recalibrate the touch screen
unless a
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Programmable Key has been assigned to launch the calibration utility.
255