Screen Control - Honeywell Thor VM2 User Manual

Screen Control

Start > Settings > Control Panel > Screen Control
Set screen properties for the Thor VM2.
Factory Default Settings
Screen Blanking (Blackout)
Enable screen blanking
Screen on delay (ms)
COM Port
Current Level
LCD Brightness (%)
Ambient Light (%)
Automatic Brightness Control
Automatic brightness control is not available on the Thor VM2.
Enable automatic
brightness control
Low to medium light level
(%)
Medium to high light level
(%)
Screen Blanking
See
Do not enable Screen Blanking until the cable is properly connected to the
specified COM port.
Screen blanking allows the Thor VM2 display to automatically be turned off whenever
the vehicle is in motion. When the Thor VM2 display is off due to vehicle motion, the
integrated keypad backlight remains on.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Screen Blanking for the hardware necessary for screen blanking.
Disabled
1000
none selected
100
(see note)
Disabled
25
75
251