Honeywell Thor VM2 User Manual page 204

•
Note: When Enable Code ID is set to None on the Data Options tab and when All is selected in
the Symbology field, Enable and Strip Code ID on the Symbology panel are grayed and the
user is not allowed to change them, to prevent deactivating the scanner completely.
When All is selected in the Symbology field and the settings are changed, the settings in
this dialog become the defaults, used unless overwritten by the settings for individual
symbologies. This is also true for Custom IDs, where the code IDs to be stripped are
specified by the user.
Note: In Custom mode on the Data Options tab, any Code IDs not specified by the user will not
be stripped, because they will not be recognized as Code IDs.
If a specific symbology's settings have been configured, a star (*) will appear next to it in
the Symbology drop-down box, so the user can tell which symbologies have been modi-
fied from their defaults.
If a particular symbology has been configured, the entire set of parameters from that
symbologies screen are in effect for that symbology. In other words, either the settings
for the configured symbology will be used, or the default settings are used, not a combi-
nation of the two.
If a symbology has not been configured (does not have an * next to it) the settings for All
are used which is not necessarily the default.
Clear Button
Clicking this button will erase any programmed overrides, returning to the default set-
tings for the selected symbology.
If Clear is pressed when All is selected as the symbology, a confirmation dialog appears:
If confirmed, all symbologies are reset to their factory defaults, and all star (*) indica-
tions are removed from the list of Symbologies.
Click the Yes button or the No button.
Enable, Min, Max
Enable
This checkbox enables (checked) or disables (unchecked) the symbology field.
192
Prefix / Suffix
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide