Honeywell Thor VM2 User Manual page 44

User Primary Events
A User Primary Event transitions the Thor VM2 to D0 (On) mode. When no user event
happens for the specified time period, the Thor VM2 transitions to D1 (User Idle), then
D2 (System Idle) and then D3 (Suspend). Timeout periods are set via the Schemes tab in
the Power control panel.
User primary events include:
•
•
System Primary Events
A System Primary Event allows the Thor VM2 to transition to D2 (System Idle) but the
Thor VM2 does not enter D3 (Suspend) as long the system event occurs.
System primary events include:
•
•
Wake Source Events
These events wake the Thor VM2 from suspend:
•
•
•
•
•
•
•
•
Events generated by these actions are not processed. For example, the touch screen tap
that wakes the Thor VM2 is ignored.
The following events DO NOT wake the Thor VM2 from suspend:
•
•
•
•
•
•
•
32
Any key press on the integrated keypad or external USB keyboard
Touch on the touch screen
Serial data transfer
USB data transfer
Power button
Touch on the touch screen
External power connection (AC/DC, Auto-On, Ignition Control/Ignition On power
modes only)
USB client connection
Ignition (switched from Off to On, Ignition Control/Ignition Off power mode only)
RTC
Serial port CTS control line
Headset connection (this is not enabled by default, but can be configured to wake the
Thor VM2)
Bluetooth keyboard or mouse
Bluetooth connection
USB client disconnect
USB host data (unless enabled via API)
USB host connection
SDIO interrupt
Serial data
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide