Honeywell Thor VM2 User Manual page 97

Manual Control Wiring Diagram
Ignition wire must be left unconnected and AC/DC power mode must be selected on the
Power Configuration Mode
Existing Circuitry On Vehicle
Fuse - See
Warning
statement below
Caution: For battery powered vehicles:
•
•
•
Caution: For internal combustion engine powered vehicles:
•
•
•
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Battery
Main Switch
+Vo -Vo
See Caution statement below
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire must be connected to the vehicle chassis ground.
Red wire is connected to battery positive. If there is a red wire and a red/white wire,
twist them together and connect to battery positive.
Black wire must be connected to battery negative. If there is a black wire and a black/
white wire, twist them together and connect to battery negative.
Green wire is connected to the vehicle chassis ground, which can also be battery
negative.
control panel.
Cable for optional
screen blanking
connection
Quick Mount
Smart Dock
COM1 or COM2
Connector
Red/White (if present)
Red
Black/White (if present)
Circular
Power
Black
Connector
Green
Blue
(not connected)
85