Honeywell Thor VM2 User Manual page 296

Alternatively, the Mobile Device Server can be disabled until needed (refer to the Wave-
link Avalanche Mobility Center User's Guide for details).
Menu Options
Note: Your Thor VM2 screen display may not be exactly as shown in the following menu options.
Contact
Connection
Server Contact
Data
Preferences
Display
Taskbar
Execution
Scan Config
Shortcuts
SaaS
Adapters
Status
284
Technical Assistance
Enter the IP Address or host name of the Mobile Device Server. Set the order in
which serial ports or RF connections are used to check for the presence of the
Mobile Device Server.
Setup synchronization, scheduled Mobile Device Server contact, suspend and
reboot settings.
Control when data is transferred between the device and the Mobile Device
Server.
Set options for Enabler startup or shutdown and logging.
Set up the Windows display at startup, on connect and during normal mode.
The settings can be adjusted by the user.
Set options for Taskbar.
Not available in this release. Use AppLock instead, which is resident on each
device.
This option allows the user to configure Enabler settings using a special bar
code that is created by the Avalanche MC Console. Scan Config not currently
supported.
Add, delete and update shortcuts to user-allowable applications.
Configure the Enabler to connect with Avalanche on Demand.
Enable or disable network and wireless settings. Select an adapter and switch
between the Avalanche Network Profile and manual settings.
View the current adapter signal strength and quality, IP address, MAC address,
SSID, BSSID and Link speed. The user cannot edit this information.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
for version information and upgrade availability.