Honeywell Thor VM2 User Manual page 315

Auto Profile
If the Auto Profile selection is not present on the Main tab, an SCU upgrade is necessary
to support this feature on the Thor VM2.
Auto Profile allows the user to configure a list of profiles that the SCU can search when
a radio connection is lost. After using the Profile tab to create any desired profiles,
return to the Main tab. To specify which profiles are to be included in Auto Profile, click
the List button.
The Auto Profile selection screen displays all currently configured profiles. Click on the
checkbox for any profiles that are to be included in Auto Profile selection then click OK
to save.
To enable Auto Profile, click the On button on the Main tab.
When Auto Profile is On, if the radio goes out of range from the currently selected pro-
file, the radio then begins to attempt to connect to the profiles listed under Auto Profile.
The search continues until:
•
•
Note: Do not include any profiles with an Ad Hoc radio mode this listing.
Once logged in, the button label changes to Admin Logout. To logout, either tap the
Admin Logout button or exit the SCU without tapping the Admin Logout button.
Admin Login
To login to Administrator mode, tap the Admin Login button.
Once logged in, the button label changes to Admin Logout. The admin is automatically
logged out when the SCU is exited. The Admin can either tap the Admin Logout button,
or the OK button to logout.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
the SCU connects to and, if necessary, authenticates with, one of the specified
profiles or
the Off button is clicked to turn off Auto Profile.
303