Top View - Enhanced Dock
Only the Enhanced Dock has these connectors on the top. The connectors are located
behind water tight plugs.
Note: A BIOS and operating system upgrade is necessary to support the Ethernet port. See
VM2 and Enhanced Dock Support
Backlights and Indicators
Display Backlight
There are several configuration options for the Thor VM2 display backlight:
Power Management
The display backlight is controlled by power management. When the user activity timer
expires, the display backlight is turned off. Timeouts can be set for the available power
management schemes.
See
Backlight Brightness
The intensity of the display backlight can be manually configured:
1. Press the Blue key to enter Blue mode
2. Press the P3 key to increase backlight brightness or the P4 key to decrease
3. Press the Blue key to exit Blue mode.
Refer to the
Screen Blanking
The Thor VM2 can be configured to blank (blackout) the display while the vehicle is in
motion.
Refer to the
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
USB Host
Power
for configuration options.
backlight brightness.
Screen Control
Screen Control
Ethernet
for information.
panel for the current display brightness level.
panel for information.
Thor
19