Eap-Tls - Honeywell Thor VM2 User Manual

To use manual PAC Provisioning:
•
•
Ensure the correct Active Profile is selected on the Main tab and warmboot. The SCU
Main tab shows the device is associated after the radio connects to the network.
Note: When using Automatic PAC Provisioning, once authenticated, there is a file stored in the
\System directory with the PAC credentials. If the username is changed, that file must be
deleted. The filename is autoP.00.pac.

EAP-TLS

To use EAP-TLS, make sure the following profile options are used.
1. Enter the SSID of the Access Point assigned to this profile
2. Set EAP Type to EAP-TLS
3. Set Encryption to WPA TKIP
4. Set Auth Type to Open
To use another encryption type, select WPA CCKM, WPA2 AES or WPA2 CCKM for
encryption and complete other entries as detailed in this section.
See
Click the Credentials button.
•
•
Enter these items as directed below.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide
Enter the PAC Filename and PAC Password.
The PAC file must be copied to the directory specified in the Certs Path global
variable. The PAC file must not be read only.
Sign-On vs. Stored Credentials
No entries except the User Certificate Filename and the CA Certificate Filename are
necessary for Sign-On Credentials as the user will be prompted for the User Name
when connecting to the network.
For Stored Credentials, User Certificate Filename and the CA Certificate Filename
must be entered.
for information on entering credentials.
327