Accessing The Bios Setup - Honeywell Thor VM2 User Manual

Accessing the BIOS Setup

To access and modify the BIOS on the Thor VM2, an external keyboard must be
attached.
When the Embedded BIOS screen (Phoenix Technologies) is displayed press the Del key
to enter BIOS setup.
Use the arrow keys to move around the screen.
Boot Order
To view or edit the boot order, select the Boot tab.
By default, the first device in the boot order is USB Hard Drive.
The second device is the Windows CE Image.
If a USB drive, such as a thumb drive, is attached to the Thor VM2 the Thor
VM2 attempts to boot from the USB drive:
•
•
Exiting BIOS Setup
To exit the BIOS setup, select the Exit tab and select one of these options:
•
•
•
150
If the USB drive contains a bootable sector, the Thor VM2 boots from the
USB drive.
If the USB drive does not contain a bootable sector, the Thor VM2 does
not boot. Remove the USB drive and boot the Thor VM2 again.
Save Setting and Restart
Exit Setup without Saving Changes
Reload Factory-Defaults and Restart
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide