Honeywell Thor VM2 User Manual page 225

Autoconnect
When checked, Autoconnect is enabled. The Connection Manager automatically con-
nects when necessary, such as when Internet Explorer is launched.
Data Connection Test
Tap the Connect button to make a temporary test connection to validate the carrier
account.
Entries identified with an asterisk (*) are used to configure the test connection.
Tap the Save Connection Data button to save the connection parameters.
GPS
This tab displays the information available from the GPS built into the Gobi radio.
Tap the Start button to initiate a scan for GPS data. The information on this tab is
updated every 3 seconds.
Tap the Reset All Data button to clear all GPS data from the Gobi radio. You must con-
firm that you want to rest the data. Use this button with caution as it takes a longer time
for the GPS to establish a valid fix after the data is cleared.
After the GPS establishes a coordinate fix, the Where am I button is active. Tapping this
button activates Internet Explore to display a Google map of the current location.
The GPS time and NMEA (National Maritime Electronics Association) string count are
displayed at the bottom of this tab.
Admin
This tab allows for entry of a PIN or PUK for the SIM card.
The PIN or PUK entered on this tab is stored in the Thor VM2 registry.
Thor VM2 with with Microsoft Windows Embedded CE 6.0 User Guide 213